B2B PRODUCT CATALOGUE Energy storage connectors, automotive fuses and assembly tools
Product photoPZM flat, angled and reinforced two-channel cable-exit accessoriesClean catalogue presentation of representative flat, angled and reinforced PZM cable-exit accessories

PZM connector cable-exit accessories

PZM cable-exit caps and angled boots

8 ACCESSORY SKUS RECORDED · MATCH THE FORM AND CABLE DESIGNATION

Cable-exit accessories for the PZM connector assemblies listed in supplier offer 676274431177. The direct SKU matrix contains three flat, three angled and two reinforced angled versions for cable openings designated by the supplier as No. 8, No. 10 or No. 12. The moulded parts use two cable channels and are kept separate from offer 746471107213 because that listing identifies its variants by explicit opening diameter rather than cable-number designation.

Product familyPZM connector cable-exit accessories
Product configurationSee the recorded options below
Data statusCatalogue configuration recorded
The product category and model page will be included in your inquiry.

PRODUCT INFORMATION

Recorded product specifications.

The values below come from the reviewed model record. Application compatibility, order-specific packing and artwork are confirmed before production.

Specification table

Specification table: PZM cable-exit caps and angled boots
ParameterRecorded value
Product typeTwo-channel cable-exit cap / angled boot accessory for PZM connector assemblies
Recorded formsFlat / angled / reinforced angled
Supplier cable designationsOpenings described for No. 8 / No. 10 / No. 12 cable
Selectable variants8 SKUs from one supplier offer
Electrical ratingNot applicable to these cable-entry accessories; no connector rating is inherited
Source reference1688 offer 676274431177; eight accessory SKUs recorded directly

Model and SKU matrix

Model and SKU matrix: PZM cable-exit caps and angled boots
SKURef.ConfigurationCurrentConductorOverall / mountingSupply
5414508446151—PZM flat cable-entry cap · opening for No. 12 cable———1 flat cable-entry cap; opening recorded by the supplier as No. 12 cable
5414508446160—PZM flat cable-entry cap · opening for No. 10 cable———1 flat cable-entry cap; opening recorded by the supplier as No. 10 cable
5414508446161—PZM flat cable-entry cap · opening for No. 8 cable———1 flat cable-entry cap; opening recorded by the supplier as No. 8 cable
5414508446165—PZM angled cable-entry cap · opening for No. 12 cable———1 angled cable-entry cap; opening recorded by the supplier as No. 12 cable
5414508446167—PZM angled cable-entry cap · opening for No. 10 cable———1 angled cable-entry cap; opening recorded by the supplier as No. 10 cable
5414508446166—PZM angled cable-entry cap · opening for No. 8 cable———1 angled cable-entry cap; opening recorded by the supplier as No. 8 cable
5401792463793—PZM reinforced angled cable-entry cap · opening for No. 8 cable———1 reinforced angled cable-entry cap; opening recorded by the supplier as No. 8 cable
5414508446168—PZM reinforced angled cable-entry cap · opening for No. 10 cable———1 reinforced angled cable-entry cap; opening recorded by the supplier as No. 10 cable
Drawings & documents +

Ask for the drawing format, specification or supporting document required for this model and application.

What should I include in an inquiry? +

Include the model, quantity, destination market, packing requirements and any drawing or reference product photo available.

LET’S START WITH YOUR APPLICATION

The right connection
starts with the details.

Send your inquiry directly to HACL. Product details and drawings can be attached.

Submitted inquiries are recorded for follow-up.

SEND AN INQUIRY

Tell us what you need.

Send your requirement, model or drawing. We normally reply within one business day.

Your details are used only to respond to this inquiry.